Overview of deaths associated with natural events, United States, 1979-2004.

Analysis of the National Center for Health Statistics' Compressed Mortality File showed that between 1979 and 2004, natural events caused 21,491 deaths in the United States. During this 26-year period, there were 10,827 cold-related deaths and 5,279 heat-related deaths. Extreme cold or heat accounted for 75 per cent of the total number of deaths attributed to natural events--more than all of deaths resulting from lightning, storms and foods, and earth movements, such as earthquakes and landslides. Cold-related death rates were highest in the states of Alaska, Montana, New Mexico, and South Dakota, while heat-related deaths were highest in the states of Arizona, Missouri, and Arkansas. These deaths occurred more often among the elderly and black men. Other deaths were attributed to lightning (1,906), storms and foods (2,741), and earth movements (738). Most deaths associated with natural events are preventable and society can take action to decrease the morbidity and mortality connected with them.     

AN EVALUATION OF PHYSICAL STREAM HABITAT ATTRIBUTES USED TO MONITOR STREAMS1

ABSTRACT: The last few decades have seen an increased reliance on the use of stream attributes to monitor stream conditions. The use of stream attributes has been criticized because of variation in how observers evaluate them, inconsistent protocol application, lack of consistent training, and the difficulty in using them to detect change caused by management activity. In this paper, we evaluate the effect of environmental heterogeneity and observer variation on the use of physical stream attributes as monitoring tools. For most stream habitat attributes evaluated, difference among streams accounted for greater than 80 percent of the total survey variation. To minimize the effect that variation among streams has on evaluating stream conditions, it may be necessary to design survey protocols and analysis that include stratification, permanent sites, and/or analysis of covariance. Although total variation was primarily due to differences among streams, observers also differed in their evaluation of stream attributes. This study suggests that if trained observers conducting a study that is designed to account for environmental heterogeneity can objectively evaluate defined stream attributes, results should prove valuable in monitoring differences in reach scale stream conditions. The failure to address any of these factors will likely lead to the failure of stream attributes as effective monitoring tools.     

The contemporary Asian silver cycle: 1-year stocks and flows

The stocks and flows of silver throughout the Asian economy for 1997 have been quantified, with major flows examined over their entire life cycle, including mining, production, fabrication, and manufacture, product use, and waste management. By compiling the findings of 11 country-level material flow analyses, a regional analysis was created. The reliability and availability of the data varied, with the most confidence given to the earlier life stages and the most uncertainty existing later. Overall, Asia is a net importer of silver, requiring nearly 7000 Mg of silver in 1997. Approximately 2200 Mg Ag are mined, and production waste totals about 640 Mg Ag. The flow of silver into use equals 9900 Mg Ag, with a considerable build-up of 7100 Mg Ag entering in-use stock. Silver waste sent directly to the environment, in addition to landfilled waste, totals 1600 Mg Ag. Much variation exists when examining country-level silver flows on a per capita basis. India and Thailand’s fondness for silver jewelry greatly increases their silver flows into use and in-use stock. Japan’s high overall consumption reflects its high GDP per capita. Regionally, a significant potential exists to tap the silver contained in the in-use stocks and to enhance the recycling rates.     

HYDROLOGIC DATA ACQUISITION AM) THE INSTRLMENTATION GAP1

Any scheme for developing our water resources must eventually focus on the hydrologic theme for answers to pressing questions about anticipated availability of water. These answers will only be as realistic as the data is reliable, inferring accuracy as well as sufficiency. To that effect, more hydrologic and meteorologic data collection stations must be added to the existing network throughout the country, and the basic instrumentation presently in use should be made more versatile, but without an accompanying near-astronomical increase in cost and in complexity. The ubiquitous so-called current meters are a case in point. Current meters have almost certainly received more man-hours of use in the field of Water Resources than any other instrument ever devised to measure stream velocity. In spite of more esoteric equipment appearing on the specialized market each year, the time-honored method of stream gaging by the velocity-area method is still widely practiced, and the basic instrument remains the current meter. The same persistent use is essentially true for the anemometer, or “wind current meter.” Over the past 30 years, a great many studies have been made to define operational parameters, particularly with respect to the statistics of data reliability. Today's needs are different from those acceptable a few years back, yet in many instances yesterday's instrument can be metamorphosed to satisfy present practice. Besides a discussion of some of the fundamental problems of data collection which must be accounted for in all areas of water resources where water and air currents must be known in space and in time, the authors present a brief critique of several new hybrid types of current meters. Two of these meters were designed especially to fill the gap between sophisticated and specialized equipment of high cost, and relatively inexpensive simpler devices lacking however the advantages of automation and self-recording features. Since the mechanical performance of current meters has been the subject of many past studies fully reported in various professional journals, it appeared advantageous to develop electronic refinements on such a type of widely used instrument. A period of research, first at Washington State University and presently at Clarkson College of Technology, produced two electronic packages applicable to current meters. The rationale of these studies was to increase the usefulness of current meters by providing velocity readout, either instantaneous or time-averaged; to include data recording on tape if and when such would be desired, together with the necessary playback facility; and to keep the electronic system independent of the current meter size. The paper describes in some detail the photo-electronic tachometer which seems to offer more reliability and flexibility of operation than induction-type transducers. One of the features most worthy of consideration is the adaptability of such device to any size of current meter frame and vanes. The rotation of an impeller one-half inch in diameter is recorded by the instrument as faithfully as that of one six inches in diameter. Where velocity transients are to be observed, the advantages of a greatly reduced inertia are evident. The inherent ruggedness of low current drain transistors and integrated circuits should make this light-actuated meter readout device well-suited for remote applications.     

Formation and control of nitrogenous DBPs from Western Australian source waters: Investigating the impacts of high nitrogen and bromide concentrations

We studied the formation of four nitrogenous DBPs(N-DBPs) classes(haloacetonitriles,halonitromethanes, haloacetamides, and N-nitrosamines), as well as trihalomethanes and total organic halogen(TOX), after chlorination or chloramination of source waters. We also evaluated the relative and additive toxicity of N-DBPs and water treatment options for minimisation of N-DBPs. The formation of halonitromethanes, haloacetamides, and N-nitrosamines was higher after chloramination and positively correlated with dissolved organic nitrogen or total nitrogen. N-DBPs were major contributors to the toxicity of both chlorinated and chloraminated waters. The strong correlation between bromide concentration and the overall calculated DBP additive toxicity for both chlorinated and chloraminated source waters demonstrated that formation of brominated haloacetonitriles was the main contributor to toxicity. Ozone–biological activated carbon treatment was not effective in removing N-DBP precursors. The occurrence and formation of N-DBPs should be investigated on a case-by-case basis, especially where advanced water treatment processes are being considered to minimise their formation in drinking waters, and where chloramination is used for final disinfection.     

The composition and biosynthesis of lipids in Thysanoessa raschi from the Clyde Estuary,Scotland

The lipid composition and biosynthesising activity of Thysanoessa raschi collected from the Clyde Estuary, Scotland, in May 1981 were examined. Triacylglycerols were the major lipid class present, although 16.7% of the total lipid were wax esters in which phytol was the dominant fatty alcohol. The thoracic contents (hepatopancreas) of the krill were capable of biosynthesising lipids in vitro from various labelled substrates. Radioactivity from [1-¹⁴C] palmitic acid was incorporated into lipids in the order phospholipids>triacylglycerols>wax esters; the bulk of the radioactivity was present in all cases in the fatty acyl moieties of the lipids. [U-¹⁴C] glucose labelled lipids in the order phospholipids>triacylglycerols>free fatty acids> was esters; in the first two lipids the radioactivity was mainly in the glycerol moieties, whereas in was esters it was solely in the fatty acyl moieties. The extent of labelling of these lipids from [U-¹⁴C] alanine was less than that from [U-¹⁴C] glucose, but the pattern of labelling was generally similar. More than 90% of the radioactivity incorporated into total lipid from ³H₂O was present in free fatty acids from which it was calculated that the hepatopancreas of T. raschi can synthesise 2.5 g of fatty acid per hour at 15°C. This value is approximately three times lower than that previously determined for T. inermis from Balsfjorden, northern Norway. The results are discussed in terms of the sources of the dietary lipids of krill and the role of endogenous biosynthesis in contributing to its lipid reserves.     

Sighting characteristics and photo-identification of Cuvier’s beaked whales (<Emphasis Type="Italic">Ziphius cavirostris</Emphasis>) near San Clemente Island,California: a key area for beaked whales and the military?

The relationship between beaked whales and certain anthropogenic sounds remains poorly understood and of great interest. Although Cuvier’s beaked whales (Ziphius cavirostris) are widely distributed, little is known of their behavior and population structure throughout much of their range. We conducted a series of five combined visual-acoustic marine mammal surveys from 2006 to 2008 in the southern San Nicolas Basin, a site of frequent naval activity off the southern California coast, west of San Clemente Island. The study area was defined by a 1,800 km² array of 88 bottom-mounted hydrophones at depths up to 1,850 m. The array was used to vector visual observers toward vocalizing marine mammal species. Thirty-seven groups of Cuvier’s beaked whales were encountered during the study period. The overall encounter rate was one group for every 21.0 h of survey effort, and was as high as one group per 10.2 h of effort during the October 2007 survey. Whales were encountered in the deepest portion of the study area, at a mean bottom depth of 1,580 m (SD 138). The average group size was 3.8 individuals (SD 2.4), which was higher than has been reported from other studies of this species. Twenty-four groups were observed over multiple surfacings (median = 4 surfacings, range 2–15). The mean encounter duration of extended sightings was 104 min (SD 98, range 12–466 min) and the mean distance moved over the course of sightings was 1.66 km (SD 1.56, range 0.08–6.65 km). Temporal surfacing patterns during extended encounters were similar to dive behavior described from Cuvier’s beaked whales carrying time-depth recording tags. Seventy-eight photographic identifications were made of 58 unique individuals, for an overall resighting rate of 0.26. Whales were sighted on up to 4 days, with duration from first to last sighting spanning 2–79 days. For those whales sighted on subsequent days, the mean distance between subsequent sightings was 8.6 km (SD 7.9). Individuals resighted over 2–3 days were usually in association with previous group members. Approximately one-third of groups contained more than one adult male, and many of the repeated associations involved adult males. These observations suggest the basin west of San Clemente Island may be an important region for Cuvier’s beaked whales, and also one which affords an unusual opportunity to collect detailed data on this species. Given its status as an active military range, it can also provide the ability to monitor the behavior of individuals in the presence of naval sonar, a critical step in the management of this and other beaked whale populations worldwide.     

A meta‐analysis of sleep and work performance: An examination of moderators and mediators

The present study utilizes meta‐analytic techniques to examine the literature on sleep and work performance. In line with previous meta‐analytic research, results indicate that sleep and work performance have a positive relationship. However, more importantly, results from moderator analyses reveal that the type of sleep measurement (sleep quantity and sleep quality), work performance measurement (task performance, organizational citizenship behavior, and counterproductive work behavior), analysis method (between‐person and within‐person), sleep report source (self‐report, other report, and objective), sleep recall window (day, week/month, and more than 1 month), and study setting (field and laboratory) differentially influence the strength of the sleep–work performance relationship. Furthermore, meta‐analytic SEM results indicate that certain mediators (affect, job attitudes, and cognitive resources) provide stronger explanations (i.e., stronger indirect effects) for the relationship between sleep and work performance, depending on the specific type of performance being examined. In general, results highlight the importance of construct operationalization and methodology decisions when conducting sleep–work performance research and provide greater insight into explanations for the relationship between sleep and work performance. Research implications, practical implications, potential limitations, and future directions are also discussed.